Číslo 3 (2016) - IMAPS flash Conference 2016 Domovská stránka kolekce Zobrazit statistiky
Steiner, F.
,
Stuna, J.
,
Hirman, M.
Temperature stable solder pastes: properties and reliability This article deals with one of the newest trends in soldering that means a using of the temperature stable solder pastes. These pas tes do not need to be stored in fridge and do not need to be ... |
||
Husák, M.
,
Laposa, A.
,
Kulha, P.
,
Nepras, P.
Analyzer of liquid chemical substances The article describes the principles of analysis of pollutants in water by molecular absorption spectrometry . The spectrometer is used for analysis. Design and implementation of software for the evaluation of water analysis is part of the work . The s... |
||
Skácel, Josef
,
Otáhal, Alexandr
,
Řihák, Pavel
,
Szendiuch, Ivan
The quality of BGA solder joint with underfill This paper deals with investigation of mechanical behavior (shear strength) of soldered BGA package with and without underfill on FR4 and Al2O3 carriers. BGA soldered on FR4 (ENIG) had higher value of shear strength than BGA soldered on alumina substrate... |
||
Novák, Lukáš
,
Pořízka, Pavel
,
Novotný, Jan
,
Šteffan, Pavel
,
Kaiser, Jozef
Bootloader for sci-trace This paper describes a realization of Bootloader for microcontrollers AVR and investigates a design for its implementation into the Sci-Trace device. Electronics in Sci-Trace consists of control board, patch board and secondary modules. Patch board only function is to connect the control... |
||
Beshajová Pelikánová, I.
,
Močička, J.
The viscosity thermal dependence of paste material for electronics The work is focused on properties of paste materials for electronics. Soldering pastes and pastes for screen printing were tested. The dynamic viscosity dependencies of pastes were analyzed. Viscosity of paste strongly affected the result of technological process. Viscosity is changed with... |
||
Puci, F.
,
Husák, M.
Magnetically levitated systems and microactuators T he article describes the two main types of magnetically levitated systems on general and detailed characteristic basis. A comparison between the AC and DC power supplies for these systems, including the pros and cons of each type, is also pr... |
||
Kerndl, M.
,
Šteffan, P.
Usage of nanogenerators as active sensors in IoT In this paper we propose the review of currently used nanogenerators that can be used as active sensors. Because the Wireless sensor network (WSN) plays an important role in the part of Internet of Things (Io... |
||
Pulec, J.
,
Szendiuch, I.
Thick film planar filter simulation This paper deals with thick film pl anar microstrip edge coupled frequency filter design and realization, where the third order, chebyshev based design is considered. The realization then considers various apllication material and substrate thickness and the properties of the resultin... |
||
Macháč, P.
,
Bláhová, V.
Graphene growth by chemical vapor deposition process on copper foil |
- DSpace at University of West Bohemia
- Publikační činnost / Publications
- Fakulta elektrotechnická / Faculty of Electrical Engineering
- Publikace FEL / Publications of FEL
- Electroscope
- Ročník 2016
- 9 2016