Full metadata record
DC pole | Hodnota | Jazyk |
---|---|---|
dc.contributor.author | Kaňáková, Sandra | |
dc.contributor.author | Kottner, Radek | |
dc.date.accessioned | 2019-08-26T10:00:11Z | - |
dc.date.available | 2019-08-26T10:00:11Z | - |
dc.date.issued | 2018 | |
dc.identifier.citation | KAŇÁKOVÁ, S., KOTTNER, Identification of material properties of foam used in motorcyclist protective equipment based on obtained experimental data and optimization algorithm. Applied and Computational Mechanics, 2018, roč. 12, č. 2, s. 139-146. ISSN 1802-680X. | en |
dc.identifier.issn | 1802-680X | |
dc.identifier.uri | 2-s2.0-85067013632 | |
dc.identifier.uri | http://hdl.handle.net/11025/34910 | |
dc.format | 8 s. | cs |
dc.format.mimetype | application/pdf | |
dc.language.iso | en | en |
dc.publisher | University of West Bohemia | en |
dc.rights | © University of West Bohemia in Pilsen | en |
dc.title | Identification of material properties of foam used in motorcyclist protective equipment based on obtained experimental data and optimization algorithm | en |
dc.type | článek | cs |
dc.type | article | en |
dc.rights.access | openAccess | en |
dc.type.version | publishedVersion | en |
dc.description.abstract-translated | This article deals with the material parameters identification of foam used in motorcyclist protective equipment, such as a shoulder pad. Experiments,namely a compression,a tension and an impact test were performedto obtain source and target data. The low-density foam material model was selected to characterize the foam. The material model was used in the finite element simulation. The numerical simulation of the impact test was used for an optimization. The parameters of the model were identified using an evolutionary algorithm in the optiSLang 3.0 software. The obtained material model will be used for the simulation of the standard test of protectors consisting of the foam used in motorcyclist protective equipment. | en |
dc.subject.translated | identification | en |
dc.subject.translated | impact | en |
dc.subject.translated | low-density foam | en |
dc.subject.translated | material model | en |
dc.subject.translated | shoulder pad | en |
dc.identifier.doi | 10.24132/acm.2018.467 | |
dc.type.status | Peer-reviewed | en |
dc.identifier.obd | 43924492 | |
dc.project.ID | SGS-2016-059/Počítačové modelování a monitorování lidského těla s využitím v lékařství | cs |
Vyskytuje se v kolekcích: | OBD |
Soubory připojené k záznamu:
Soubor | Velikost | Formát | |
---|---|---|---|
467-3189-1-PB.pdf | 1,59 MB | Adobe PDF | Zobrazit/otevřít |
Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam:
http://hdl.handle.net/11025/34910
Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.