Title:	Effect of soaking temperature on the microstructure and mechanical properties of heat treated Al-Si-Nb TRIP steel
Authors:	Kučerová, Ludmila Burdová, Karolína Stehlík, Adam
Citation:	JIRKOVÁ, Hana ed.; JENÍČEK, Štepán ed. Proceedings PING 2019: modern trends in material engineering: 10.-13.09.2019, Pilsen. 1. vyd. Plzeň: University of West Bohemia, 2019, s. 44. ISBN 978-80-261-0879-5.
Issue Date:	2019
Publisher:	University of West Bohemia
Document type:	konferenční příspěvek conferenceObject
URI:	http://hdl.handle.net/11025/35230
ISBN:	978-80-261-0879-5
Keywords:	tepelné zpracování;TRIP oceli;zadržený austenit
Keywords in different language:	heat treatment;TRIP steels;retained austenite
Abstract in different language:	Two-step heat treatment with bainitic hold at 425 °C was applied to low alloyed high strength steel with partial substitution of silicon by aluminium. The steel was further micro-alloyed by niobium. Various soaking temperatures in the range of 750-1250 °C were used to analyse the effect of soaking hold on mechanical properties and microstructure of the steel. According to calculations in JMatPro, the temperatures below 900 °C should lie in an intercritical (tow phase) region, while the temperature of 900 °C should be the first one to ensure full austenitization of this steel. To dissolve different portion of niobium into solid solution, higher soaking temperatures were also used. Tensile strengths of 780-1069 MPa and total elongation of 22-46 %.
Rights:	© University of West Bohemia
Appears in Collections:	Proceedings PING 2019: modern trends in material engineering Konferenční příspěvky / Conference Papers (RTI) Proceedings PING 2019: modern trends in material engineering

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.